Shanghai Zhenka Industries Co.,ltd               
首页 企业简介 产品中心 技术资料 说明书下载 工程案例 联系方式
百得燃烧机
低氮燃烧机
利雅路
燃烧机配件
定型机专用
   锅炉/烘箱电控箱  (9)
   程控器  (66)
   温控仪/比调仪  (2)
   燃气电磁阀  (69)
   风门执行器  (27)
   点火变压器  (13)
   火焰控测器  (14)
   油泵/油嘴  (69)
   压力开关  (16)
   燃气减压阀/过滤器  (55)
   燃气检漏装置  (4)

   咨询热线
 售前报价
   杨先生 13402030803
   电  话:021-51860685
 
百得利雅路燃烧器739582873
外贸部
  电  话:13585757521
百得利雅路燃烧器
售后服务
   卜先生 13611667605
 
   传  真:021-51861217
   E-mail:zksy88@163.com
   地  址:颛兴路358弄

 公司公众号:k51860685

 

 

 

 

 

 

西门子VLG...系列高温气体单阀
 
VLG...系列高温气体单阀

品牌:SIEMENS(西门子)

产地:德国

 产品介绍

Two-port valves, 1-1/2“...DN80 of the normally closed type. For combination with electrohydraulic actuators of the SKL..., SKP... or SQX... line. Shutoff or control valves for use in the air supply line of industrial combustion plant with or without heat recovery.

VLG10...

  • Valve body with internally threaded connections

  • Auxiliary connections on the inlet and outlet side are closed off with plugs and seals

  • Slightly contoured valve plug with seal between plug and seat

  • Valve stem is guided on both sides of the plug by Teflon bushings

  • Return spring in the medium, acting directly on the valve plug

  • Strainer on the inlet side with a mesh dia. of < 1 mm

  • Actuator is fitted to the valve body by means of four screws, no seals required

VLG15...

  • Valve body with flanged or threaded connections

  • Auxiliary connections with plugs on the inlet and outlet side, closed off with metallic seals

  • Flat, non-contoured valve plug

  • Valve stem is guided by a graphite bearing in the valve body and a Teflon bearing in the spring casing

  • Return spring is located outside the medium in the spring casing

  • Spring casing is rigidly connected to the valve body by means of four spacers

  • Actuator is fitted to the valve body by means of four screws, no seals required

 型号表
口径 型号(螺纹) 运行承压mbar 流量(在1mbar压差下)m3/h 接口数
60ºC 150ºC 450ºC 600ºC 20ºC 450ºC 600ºC 内部RP1/4 外部RP1/4 内部RP3/4
1-1/2,DN40 VLG10.404 1500 300 32 50 55 2 2 -
2,DN50 VLG10.504 VLG15.504 1500 300 48 75 82 2 2 -
3,DN80 VLG15.804 700 300 82 129 140 1 1 2
 技术参数
主要参数
最大泄露率
- 内部,在100mbar压差下 0.3m3/h
- 外部,在100mbar压差下 0.7m3/h
环境条件
运输环境 IEC 721-3-2
内部条件 class 2K2
机械条件 class 2M2
温度范围 -15...+60ºC
湿度 <95%
运行环境 IEC 721-3-3
内部条件 class 3K5
机械条件 class3M2
温度范围 -15...+60ºC
湿度 <95%
不得进水
 

_版权所有:上海珍卡实业有限公司 地址:上海市闵行区颛兴路358号(200210)B
电话:+86(021)51860685   传真:+86(021)51861217
沪ICP备16039745号-1  E-mail:

 

沪公网安备 31011202005290号